Skip to content
CleaningHQSearch

Composite decking

Age and product line decide whether a pressure washer is allowed. Trex permits it on some boards and advises against it on older ones.

Precautions

  • Check the manufacturer's instructions
  • Test on an inconspicuous area first

Start here

What this is, what tends to go wrong with it, and what to do about it.

Step by step

Pollen and dirt settle on the boards, and Trex says mould feeds on that layer. Removing the layer is the main job.

A name on a step means it is that maker's or body's instruction for its own products. Your manual comes first.

Routine cleaning

  1. TrexHose off loose debris, then scrub with warm soapy water and a soft brush. Do not use a wire brush.
  2. TrexRinse each board fully. Dirty water left to dry leaves a film.

Pressure washing a high-performance board

  1. TrexUse no more than 3,100 psi, with a fan tip. Soap the deck, brush each board gently, then rinse each board with the tip at least 20 cm away.

Spills and grease

  1. TrexClean grease and food quickly. On high-performance boards Trex asks for this within seven days to keep its stain warranty, using a hose, then warm soapy water and a soft brush.

Stop if

  • TrexYou have Trex Accents, Origins, Contours, Profiles or Brasilia. Trex does not recommend pressure washing these early-generation boards.
  • TrexThe product contains bleach or acid. Trex says these can lighten the surface, so try a hidden area first.
  • TrexYou do not know who made your boards. Stick to soapy water and a soft brush until you do.
Sources for these steps (1)

In detail

Composite boards are sold as low maintenance, but they still collect pollen, dirt and grease, and Trex says mould feeds on that layer rather than on the board. Most of the cleaning is soap, water and a soft brush. What changes between boards is what they can take. Trex separates its high-performance lines, which may be pressure washed within stated limits, from its early-generation lines, where it does not recommend a pressure washer and excludes the resulting damage from cover. Find out which you have before reaching for one. This is Trex's advice for Trex boards. Other composite decks have their own limits, so use your own maker's care sheet. If you cannot identify the board, a soft brush and soapy water is the only route here that does not depend on knowing.

Sources for this page

Sources

  1. How to clean a Trex deck

    Trex · Manufacturer documentation

    Relied on for: The difference between product lines, pressure limits, the soft brush routine and mould feeding on surface debris. (states this directly)

Share this page

More garden and outdoors

All garden and outdoors