Skip to content
CleaningHQSearch

Timber decking

Wood can be gouged by a pressure washer. If you use one, Which? says wide nozzle, low pressure, along the grain and at least 60 cm away.

Precautions

  • Check the manufacturer's instructions
  • Test on an inconspicuous area first

In detail

Timber decking is softer than paving, so the risk with a pressure washer is cutting into the wood rather than failing to clean it. Which? gives a wide 25 or 40 degree nozzle, 500 to 1,200 psi, lower for softer woods such as pine and cedar, at least 60 cm from the surface, and spraying along the grain. It suggests cleaning twice a year, in spring and autumn, and testing a small area at the lowest pressure first. The figures describe a machine setting, and machines and boards vary, so treat them as an upper guide. A deck with a stain, oil or paint finish has its own product instructions, and those govern. Where the finish is unknown, start with the lowest setting on a hidden board, and stop if the surface roughens or colour comes off.

Sources for this page

Sources

  1. Common mistakes to avoid when using a pressure washer

    Which? · Credible secondary source

    Relied on for: The nozzle, pressure, distance, grain direction, frequency and testing advice for wood. (states this directly)

Share this page

More garden and outdoors

All garden and outdoors