Coffee grinder
Oil and fine grounds build up where the burrs sit. Baratza suggests a clean every four to six weeks, and sooner for dark roasts, which clog more easily.
Precautions
- Disconnect from the power supply first
- Check the manufacturer's instructions
In detail
A burr grinder mostly needs dry cleaning. Baratza says oils, fines and chaff build up in the burr chamber and exit chute, and that this affects flavour, grinding speed and consistency, and makes clogs more likely. Every four to six weeks, take off the hopper and upper burr, grind through any leftover coffee, then brush out the loose grounds and clean inside the burr chamber and chute. Wash the hopper and grounds bin in warm soapy water and dry them thoroughly. Baratza offers grinder cleaning tablets as an optional extra, and recommends them mainly if you grind dark roasts, whose oils can make coffee stick and clog the grinder. Lighter roasts leave less oil but more static and chaff. To clear a clog, unplug the grinder, remove the hopper and upper burr, and push the packed coffee out of the chute with the handle of the cleaning brush or a straightened paperclip. Reassemble it and test on a very coarse setting. Grinders vary, so check your own manual. Sage warns that the burrs on its machines are extremely sharp, and it reserves full removal for blockages. Whether the burrs themselves can be washed is not established, so do not assume they can.
Sources for this page
Sources
Grinder Cleaning Essentials: Routine Care & How to Prevent Clogs
Baratza · Manufacturer documentation
Relied on for: The cleaning interval, method, roast effects and how to clear a clog. (states this directly)
the Barista Express BES875 / SES875 user guide
Sage Appliances · Manufacturer documentation
Relied on for: That burrs are extremely sharp and removal is for blockages. (states this directly)