Skip to content
CleaningHQSearch

Catalytic oven liner

Coated panels that clean themselves when hot. Makers agree on one thing: no oven cleaner on them. AEG also says marks that stay are normal.

Precautions

  • Check the manufacturer's instructions
  • Do not apply to a hot surface

Start here

What this is, what tends to go wrong with it, and what to do about it.

What tends to go wrong

Part of Oven.

In detail

A catalytic liner is a textured panel fitted to the sides or back of some ovens. Grease is broken down when the oven runs hot, so the liner is cleaned by heat rather than by scrubbing. AEG's method is to take out the shelves, wipe the cavity floor and door, and run the oven at 250°C for about an hour, then wipe out the debris when cool. It says not to put cleaners on the liners, and it warns you to expect some marks to remain, which it says are normal and do not affect the oven. Hoover agrees about oven cleaner but goes further than AEG on washing: it says linings can be removed and wiped with hot soapy water. The two makers differ, so follow your own oven's manual. Do not assume a liner is removable, and do not use the method for a plain enamel oven on it.

Common problems
Grease

Sources for this page

Sources

  1. How to clean an oven with catalytic liner

    AEG (Electrolux Group) · Manufacturer documentation

    Relied on for: The 250°C self-clean, no cleaners on the liners, and that marks may remain. (states this directly)

  2. Catalytic liners

    Hoover (Candy Hoover Group) · Manufacturer documentation

    Relied on for: That linings may be wiped with hot soapy water and that oven cleaners must not be used on them. (states this directly)

Share this page