Skip to content
CleaningHQSearch

Efflorescence

White salts carried to the surface by water. Brush them off dry rather than washing them, and if they keep coming back, look for where the water is getting in.

Precautions

  • Test on an inconspicuous area first

What to do, by surface

Salts carried out of brick, block, mortar or concrete by water and left behind when it evaporates.

Fresh or old: Fresh deposits are powdery and soluble. With time some become insoluble calcium carbonate, which is much harder to remove. BRANZ says this form turns invisible when wet.

Mark or damage: It is a surface deposit and does not affect how the wall performs. But it is also a sign: if it persists, water is still getting in.

Brick, block and concrete: powdery deposit

  1. BRANZBrush with a stiff, dry bristle brush and collect the salt with a dustpan or vacuum.
  2. BRANZOr wipe with a barely damp cloth such as a chamois, rinsing it often in clean water.
  3. BRANZIf the wall has heavy salts, BRANZ uses a paper pulp and water poultice, removed when dry and repeated several times.

New concrete paving

  1. MarshallsMarshalls says the effect is temporary and that weathering generally removes it, so it may need nothing at all.

Hard white deposit that will not brush off

  1. BRANZTreat this as a job for a professional. BRANZ says wire brushing and acid washing are likely to affect the surface.

Do not

  • BRANZDo not hose it off. BRANZ says water dissolves the salts and can carry them back in to reappear.
  • BRANZDo not sandblast. BRANZ says it erodes the surface and increases porosity.
  • MarshallsKeep acid cleaners away from paving unless the maker says otherwise. Marshalls warns they can harm concrete, clay and natural stone.

How firm this is: Several independent sources agree.

Sources for these steps (2)

Does it brush off as a powder?

  • Yes, powdery

    • Dry stiff brush
    • Collect the salt
    • Do not hose it
  • No, hard and fixed

    • Ask a professional
    • Wire and acid can mark the surface
Based on BRANZ Bulletin 593. If either kind keeps returning, water is getting in. Diagram by CleaningHQ.

In detail

Efflorescence is the white deposit, sometimes brown, green or yellow, left on brick, block and concrete when water carries soluble salts to the surface and evaporates. BRANZ, a building research body, says it needs three things: salts, moisture and evaporation. It does not affect how the wall performs. The powdery form is soluble and brushes off with a stiff dry bristle brush. Collect what comes off. Do not hose it, because water can carry the salts back into the wall to reappear. Over time, some salts react with air and become insoluble calcium carbonate, which is much harder to remove, so act early. Marshalls, a paving maker, describes the same effect on its concrete products as temporary and says weathering generally removes it, and it warns that acid-containing cleaners can harm concrete, clay and natural stone. Cleaning only removes the symptom. If efflorescence persists, water is still getting in, and that is what needs fixing.

What works

Sources for this page

Sources

  1. Bulletin 593: Efflorescence

    BRANZ · Trade or professional body

    Relied on for: The cause and three conditions, soluble and insoluble forms, dry brushing, not washing, and that persistence indicates water entry. (states this directly)

  2. Marshalls technical information

    Marshalls · Manufacturer documentation

    Relied on for: That efflorescence is temporary, is mistaken for fading, does not affect durability, is generally removed by weathering, and that acid-containing cleaners can harm concrete, clay and natural stone. (states this directly)

Share this page