Gas hob burner
Caps and rings are washed by hand and must go back dry and correctly seated. Neff rules out the dishwasher for them.
Precautions
- Do not apply to a hot surface
- Check the manufacturer's instructions
Start here
What this is, what tends to go wrong with it, and what to do about it.
What tends to go wrong
Food heated until it carbonised and bonded to the surface. Time and softening do the work; scouring powder does the damage.
Why it is difficult: Contact time, Carbonisation, Adhesion and cohesion, Why old stains are harder
Part of Hob.
In detail
A gas burner's cap and flame spreader take boil-overs and carbon. Bosch and Neff give almost the same method: let them cool, clean with soapy water and a non-metal brush, and dry them completely. Both insist the cap is seated correctly when it goes back. Bosch adds a reason to dry thoroughly: water droplets or damp patches at the start of cooking may damage the enamel. Neff says gas rings, grills, burner caps and heads should not go in a dishwasher, because heat and strong detergent can discolour them. Bosch's page does not address the dishwasher, so treat the point as unsettled for other makes rather than cleared. Do not take the control knobs off. Both makers warn that moisture may get into the appliance, and both rule out steam cleaners.
Related
- Common problems
- Burnt-on food and carbon deposits
Sources for this page
Sources
Bosch Home Appliances UK · Manufacturer documentation
Relied on for: Soapy water and a non-wire brush, drying fully, seating the cap, and the knob and steam cleaner warnings. (states this directly)
NEFF UK · Manufacturer documentation
Relied on for: The non-metallic brush, drying, seating, the dishwasher exclusion, and the knob and steam cleaner warnings. (states this directly)