Skip to content
CleaningHQSearch

Espresso machine

Two separate jobs that are easy to confuse: a cleaning cycle for coffee oils and descaling for minerals. Sage says one machine prompts only the first.

What not to do

Scouring powder is ruled out by the manufacturer for espresso machine

Best avoided

The available guidance advises against this.

Sage's instruction for its Barista Express.

Evidence

Strongly supported

Sources

  1. the Barista Express BES875 / SES875 user guide

    Sage Appliances · Manufacturer documentation

    Relied on for: That abrasive cleansers are not used, because they can scratch the surface. (states this directly)

Precautions

  • Disconnect from the power supply first
  • Check the manufacturer's instructions

Start here

What this is, what tends to go wrong with it, and what to do about it.

Which part are you cleaning?

These parts take different answers. Cleaning one the way you clean another is a common way to damage this.

  • Steam wand

    Sage says to wipe and purge it after every use. If the tip blocks, turn the machine off, let it cool, and clear the holes with the supplied pin.

  • Portafilter and filter basket

    Rinse them under hot water straight after use. If a basket's holes block, Sage says to use the pin, then soak in cleaning tablet solution for about 20 minutes.

In detail

On an espresso machine, coffee oil and limescale are separate problems, and each needs its own routine. These are Sage's instructions for its Barista Express. Other machines differ, so check your own manual. After every use, rinse the filter basket and portafilter under hot water to remove coffee oils. Wipe the steam wand with a damp cloth and briefly run steam over the drip tray to clear milk from inside it. Wipe the group head and shower screen with a damp cloth. When the Clean Me light shows, run the cleaning cycle with the cleaning disc and one tablet. If a tablet has not dissolved, repeat the cycle. Descaling is separate, and this machine will not remind you. Sage suggests every 90 days at water hardness level 4, and every 60 at level 6. Take the water filter out first, use the descaling powder as directed, do not use bottled water, then rinse with a full tank of fresh water. Wash the drip tray in warm soapy water with a soft cloth. Sage excludes abrasive cleansers, pads and cloths. Do not immerse the machine, cord or plug. If the machine has a built-in grinder, take care with the burrs, which Sage calls extremely sharp.

Parts
Steam wand, Portafilter and filter basket

Sources for this page

Sources

  1. the Barista Express BES875 / SES875 user guide

    Sage Appliances · Manufacturer documentation

    Relied on for: The separate cleaning and descaling routines, their intervals, the after-use care, and the exclusions. (states this directly)

Share this page
Parts of an espresso machine to cleanA front view of an espresso machine with six numbered parts: the water tank at the back, the group head and shower screen, the portafilter and basket beneath it, the steam wand at the side, the drip tray at the base, and the burrs under the bean hopper.123456
  1. Water tank and filter. Remove the filter before descaling.
  2. Group head and shower screen. Wipe with a damp cloth.
  3. Portafilter and basket. Rinse under hot water after each use.
  4. Steam wand. Wipe and purge after each use.
  5. Drip tray. Warm soapy water and a soft cloth.
  6. Burrs. Extremely sharp. Remove only to clear a blockage.
Based on Sage's guide for the Barista Express. Layouts differ between machines. Diagram by CleaningHQ.

Parts that need different treatment

Each of these needs its own care, so advice for the whole appliance will not fit them all.

More kitchen appliances

All kitchen appliances